Peer-Reviewed Publications
R. Terpsma, R. Wright Carlsen, R. Szalkowski, S. Malave, A. Lux Fawzi, C. Franck, C. Hovey, “Head Impact Modeling to Support a Rotational Combat Helmet Drop Test.” Military Medicine, PMID: 34508268, DOI: https://doi.org/10.1093/milmed/usab374, September 2021.
C.B. Hovey and A. Toglia, “Four-Point Planar Homography Algorithm for Rectification Photogrammetry: Development and Application.” SAE International 2013-01-0780, 2013.
C.B. Hovey, E.H. Raphael, and H.Z. Xu, “Validation of Occupant Trajectory Model using the Ford Expedition Dolly Rollover Experimental Test Data.” SAE International 2013-01-0472, 2013.
C.B. Hovey, M.L. Kaplan, and R.L. Piziali “Occupant Trajectory Model using Case-Specific Accident Reconstruction Data for Vehicle Position, Roll, and Yaw.” SAE International 2008-01-0517, 2008.
J.H. Heegaard, P.F. Leyvraz, and C.B. Hovey, “A Computer Model to Simulate Patellar Biomechanics Following Total Knee Replacement: The Effects of Femoral Component Alignment,” Clinical Biomechanics, 16:415-423, 2001.
C.B. Hovey, “Stress and Motion in Diarthrodial Joints Using Coupled Nonlinear Elastodynamics, Rigid Body Dynamics, and Large-Slip Contact-Impact,” Stanford University Doctoral Thesis, Stanford, CA, 2000.
S.M. Kurtz, J.A. Ochoa, C.B. Hovey, and C.V. White, “Simulation of Initial Frontside and Backside Wear Rates in a Modular Acetabular Component with Multiple Screw Holes,” Journal of Biomechanics, 32:967-976, 1999.
Conference Proceedings
A. Polonsky, C. Hovey, J. Lamb, P. Chao, M. Echlin, H. Lim, K. Johnson, J. Deitz, T. Pollock, “,” submitted to The 7th International Congress on 3D Materials Science (3DMS 2025), Anaheim, CA, 2025.
A. Polonsky, P. Chao, C. Hovey, A. Bordas, R. Oakley, J. Deitz, J. Emery, “Directing Flow: Pipelines for 3D Data,” invited to Minerals, Metals & Materials (TMS), Las Vegas, NV, 2025.
A. Tripathi, M. Buche, R. Carlsen, C. Hovey, E. Lejeune, “Automated, Open-Source Workflow for Creation of Human Digital Twins at Scale,” International Mechanical Engineering Congress & Exposition (IMECE), Portland, OR, 2024.
P. Chao, I. Hernandez, T. Cisneros, S. Bamzai, C. Hovey, B. Phung, A. Spear, J. Emery, A. Polonsky, “Enabling Ductile Failure Prediction in Additively Manufactured Metals via 3D Characterization,” The Rio Grande Symposium on Advanced Materials, Albuquerque, New Mexico, 2024.
S. Miller, A. Agelastos, M. Christon, D. Hensinger, C. Hovey, M. Mosby, J. Rees, J. Thomas, B. Treweek, M. Wong, “Modified Immersed Finite Element Method (mIFEM) for explicit Eulerian to explicit Lagrangian coupling,” 16th World Congress on Computational Mechanics (WCCM), Vancouver, British Columbia, Canada, 2024.
J. Thomas, S. Miller, C. Hovey, M. Mosby, J. Rees, M. Wong, A. Agelastos, M. Christon, D. Hensinger, B. Treweek, “Interface mechanics for explicit Eulerian to explicit Lagrangian coupling using the modified Immersed Finite Element Method,” 16th World Congress on Computational Mechanics (WCCM), Vancouver, British Columbia, Canada, 2024.
A. Tripathi, Y. Wang, R. Carlsen, E. Lejeune, C. Hovey, “Demonstration of a Fully-Automated Workflow for a Subject-Specific Human Digital Twin for Traumatic Brain Injury Assessment,” International Mechanical Engineering Congress & Exposition (IMECE), New Orleans, LA, 2023.
A. Tripathi, Y. Wang, R. Carlsen, E. Lejeune, R. Terpsma, C. Hovey, “Towards a Fully Automated Workflow for Subject-Specific Human Digital Twins for Traumatic Brain Injury Risk Assessment,” Military Health System Research Symposium (MHSRS), Kissimmee, FL, 2023.
C. Hovey, A. Fawzi, R. Szalkowski, S. Malave, R. Terpsma, C. Franck, “Why the helmet military specification test should be revised to include a rotational component.” Military Health System Research Symposium (MHSRS), Kissimmee, FL, 2020.
C. Hovey, R. Terpsma, A. Fawzi, R. Szalkowski, S. Malave, C. Franck, “Investigation of Intracranial Strains and Strain Rates in a 3D Human Head Model During Military Specification Impact Test,” Military Health System Research Symposium (MHSRS), Kissimmee, FL, 2019.
C. Cooper, D. Dederman, S. Haniff, C. Hovey, K. Ruggirello, R. Terpsma, “Computational Modeling of Blast-Induced Cavitation Bubble Collapse,” First International Symposium on Traumatic Brain Injury Mechanisms and Protection, Arlington, TX, 2019.
C. Cooper, D. Dederman, S. Haniff, C. Hovey, K. Ruggirello, R. Terpsma, “Geometric Framework for Finite Element and Finite Volume Analyses of Blunt and Blast Insults to the Sandia Head/Neck Model,” DoD Computational Human Body Modeling Performer Workshop, McClean, VA, 2019.
C.F. Cooper, C.B. Hovey, and P.A. Taylor, “In Silico Investigation of Fluid Cavitation as a Potential Damage Mechanism in Blast-Induced Traumatic Brain Injury,” American Society of Mechanical Engineers (ASME) International Mechanical Engineering Congress and Exposition (IMECE), Tampa, FL, 2017.
A.M. Willis, C. Cooper, S. Miller, R. Mejia-Alvarez, M. Tartis, K. Welsh, A. Wermer, C. Hovey, F. Masoomi, S. Vidhate, K. Ferguson, I. Fuller, R. Morgan, D. Perl, P. Taylor, “Building and Validating a Model of Human Blast Traumatic Brain Injury: A Hybrid Computational and Experimental Approach,” Military Health System Research Symposium (MHSRS), Kissimmee, FL, 2017.
C.B. Hovey, M.L. Kaplan, and R.L. Piziali, “Model for Occupants Ejected from Vehicles with Roll and Yaw,” American Society of Biomechanics (ASB), Stanford, CA, 2007.
C.B. Hovey, J.H. Heegaard, G.S. Beaupré, and F.E. Zajac, “Coupling Stress Analysis of Joints with Human Gait to Improve Wear Prediction in Joint Replacements,” 2nd National Rehabilitation Research and Development Conference, Washington, DC, 2000.
C.B. Hovey and J.H. Heegaard, “Coupled Rigid-Deformable Body Formulation for Analysis of Joint Stress and Deformation During Gait,” International Mechanical Engineering Congress and Exposition, Nashville, TN, 1999.
J.H. Heegaard and C.B. Hovey, “Hierarchical Models for Large-Scale Simulations of the Musculoskeletal System,” 4th International Symposium on Computer Methods in Biomedical Engineering, Lisbon, Portugal, 1999.
J.H. Heegaard and C.B. Hovey, “Coupling of a Rigid Multibody System with a Deformable Continuum Using an Augmented Lagrangian Formalism,” 5th U.S. National Congress on Computational Mechanics, Boulder, CO, 1999.
S.M. Kurtz, J.A. Ochoa, C.B. Hovey, and C.V. White, “Frontside vs. Backside Wear in an Acetabular Component with Multiple Screw Holes,” 45th Annual Meeting, Orthopaedic Research Society, Anaheim, CA, 1999.
C.B. Hovey and J.H. Heegaard, “Viscous Effects May Regulate Endochondral Ossification Patterns During Joint Formation,” 11th Conference of the European Society of Biomechanics, Toulouse, France, 1998.
J.H. Heegaard, C.B. Hovey, and M.L. Kaplan, “Fast Convergent Solvers for Augmented Lagrangian Equations in Contact Mechanics,” 10th International Conference of Computational Engineering Science, Atlanta, GA, 1998.
M.L. Kaplan, C.B. Hovey, and J.H. Heegaard, “Energy Conserving Algorithm for Gait Simulation with Persistent Contact,” ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, 1998.
C.B. Hovey, M.L. Kaplan, and J.H. Heegaard, “A Viscoelastic Model for Finite Deformation of Soft Tissue,” ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, 1998.
J.H. Heegaard, C.B. Hovey, and M.L. Kaplan, “Computer Assisted Planning for Knee Surgery: A Patient Specific Approach,” International Mechanical Engineering Congress and Exposition, Atlanta, GA, 1996.
A.M. Vinogradov and C.B. Hovey, “Large Buckling Deformations of General Laminates,” 10th International Conference on Composite Materials, 5:11-17, 1995.
A.M. Vinogradov and C.B. Hovey, “Nonlinear Buckling Characteristics of Regular Asymmetric Laminates,” Materials and Design Technology, 71:77-82, 1995.
or Download